Hey guy's i'm working on new tee signs for south mountain. So far they're semi-gloss white, 10 X 14 X 2 and all 18 of them will look about somethin' like dis.

All black paint, then a crud ton of clear-coat....

Any suggestions, Ideas, feedback, etc. would be nice.

I'm probably going to put time into them this weekend, so the sooner the better with the feedback.

They look good. What will the sign material be? Do you have any idea what they will cost ea? Are you stenciling the letters on?

Here is an idea based on what you have.

you should first contact the parks

run it by them first
jordan wants lehigh county parks on the sign
parkway wants city of allentown parks and recreation department

just proofed the jordan signs this week and they are off to get printed

a friend of mine (yes i got a friend) works for a local company that make recycling containers

the signs we are creating will be routed out of a 4x 8 sheet of plastic,a decal applied to it and a piece of polycarbonate over top of that to prevent damage

the center will be routed out with a 1/2" edge all the way around the outside and the polycarbonate will fit inside flush with the top

once they are made and we're happy with them we may also use these at the parkway

heres a sample of one of the signs

http://homepage.mac.com/rb_12024/.Public/jordanhole3.jpg

so its looking a bit more like this now...not the real distances


I'll figure something out with the parks dept I guess. Final stuff is going to wait until any decisions about red tees and alternate pins in discussed, but I intend to have something around icebowl...